Think about that before you purchase. Some believe the extra mass Put one of these in the pocket, bolt on the neck and you are good to go with tight wood to wood coupling.

A pickguard is .090 thick. And to further complicate things the neck and body undergo this expansion and contraction at different rates due to the cut of the neck being either rift, flat or quarter sawn, the type of finish and different species of woods. If you have a .750 neck and want to put it on a Fender body that requires a .790 neck we have a solution for you. lo&behold I ended up taking most of my guitars for this service! It is 11/16″ deep. They are 25.5″ scale and 22 frets long, meaning they have a 22nd fret overhang. I had Greg do a stainless steel refret on my maple fretboard Stratocaster. Posted by about stainless frets, hands down. '50s Classic Strat         Eric Clapton Strat        American Deluxe "V"    Jimmie Vaughan Strat.

We have seen guitars where people bolted the neck on, not realizing the overhang of the fretboard was holding the neck up out of the pocket. (Please note: Final string slot filing and nut shaping modification is required to ensure proper fit and performance.)

The following setup procedures and specifications are for your Stratocaster as equipped with the strings that come on the instrument as standard equipment from the factory. Who knows? Above is a picture of a 1996 American Strat neck pocket.

For Fender Stratocaster and Telecaster guitars, the proper size of this gap varies slightly with fingerboard radius: Neck Radius.

Main Stratocaster Guitar Discussion Forum, (You must log in or sign up to reply here. Learn more about Fender electric basses.

I had a guitar once that was 47mm wide ate the nut, but it wasn't a Fender. We have measured more Fenders than most people will see and these are their measurements. CURRENT HOURSPlease call for appointment!

It's time to bolt on your next dream neck! done on a relatively rare 1981 Gibson 335-S Deluxe Professional. He was apologetic (when he didn’t need to be) about his shop’s wait time, and he kept in touch throughout the process just to make me feel comfortable. He also found fault with a certain switch, and immediately told me how he would handle it. Fender literally wrote the book on electric basses, laying the foundation for musical innovation and evolution. The profile of choice for Eric Clapton & Jimmie Vaughan.

B = 1 5/8" wide at the nut (normal size). New Bent Steel Saddles with Elongated String Slots, Copper Infused High Mass 100% Metal Bridge Block, Thinner Undercoat Finish for Improved Body Resonance, Tinted Neck, Aged Plastic Parts, 9.5" (24.1 cm) (fretboard radius), Chrome (hardware), Molded rectangular SKB case, Cable, Strap, Polishing Cloth (included accessories), Maple (neck material), 4-Bolt Neck Plate with Micro-Tilt (neck plate), Modern "C" Shape (neck shape), S/S/S (pickup configuration), Polishing Cloth Included (polishing cloth), No-Load Tone Control (special electronics), Synthetic Bone (string nut), Fender USA Super Bullets 3250L, NPS, (.009-.042 Gauges) (strings), All contents and images on this site are copyright protected by their respective owners.

Neck size usually refers to the front-to-back thickness of the neck and how that tapers as you go from the low to high frets. The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. It’s a useful measurement because, for example, if you have fret buzzing going on, it’ll give you a good idea of how much you’ll need to have the truss rod tweaked. Full-size body, neck, headstock, routing cavities, measurements. Find some of the tools you'll need to measure neck relief here. Repeat this process on the low E string (for both guitars and bass guitars). Most everyone makes neck pockets that are 5/8″ or .625″ deep except Fender. These letters were stamped on the butt-end of the necks, and have nothing to do with neck profile. Customers often ask for recommendations on which These shims take some time to make. To contact the forum owner hit the Contact Us link. Check the carve on the back shoulders of a neck. I had no qualms about shipping my guitar to him after we had a brief exchange. You need to know what kind of neck you need to purchase so it will fit.

A good luthier is hard to find. PSD – Layers / Measurements. refinish the board for a re-fret, but Greg was able to do it without refinishing! If you put a .790 Fender neck in a 5/8″ pocket the height of the neck might be too high to adjust the saddles properly. This is a match made in heaven for players with larger stature or those who The shape of the back also matters a lot ('C', 'D', 'boat', soft 'V', hard 'V'). popular profiles we offer including key Fender models that each can be found Order now and we expect to ship within the next 30 days. If you buy a .750 neck from Aperio and specify you are using it on a Fender body we’ll include a pocket shim for free. The STRATosphere is not an authorized dealer or reseller of Gibson products. This will eventually warp the neck and fingerboard or separate the fingerboard from the neck if it is a glued up neck. For Fender Stratocaster and Telecaster guitars, the proper size of this gap varies slightly with fingerboard radius: For Fender bass guitars, the optimal measurements again vary slightly according to fingerboard radius: Should you measure no relief at all or relief amounts in excess of those listed here, you probably need to have the truss rod adjusted. From the early ’60s to the early ’70s, Fender referred specifically to the nut width of its instrument necks using the letters A (1 ½”), B (1 5/8″), C (1 ¾”) and D (1 7/8″). I have nothing but great things to share about my experience with Greg. DISCLAIMER: Affix the capo to the first fret and depress the high E string at the last fret (G string on a bass guitar), or where the neck joins the body (often the 17th fret on Stratocaster and Telecaster guitars). This implies the pocket is the same width. The work is just gorgeous and he took tremendous care in making sure I received it just as I sent it.

I live in North Carolina and needed a re-fret. Don’t see your country listed above? The neck is also pre-drilled with five holes to accommodate a traditional four-bolt or offset four-bolt neck-mount design.This replacement neck is for a Fender or Squier® by Fender guitar.Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel.

I'm checking the Classic Series '50s Stratocaster (Mexico), the specs on the Fender site say "Soft V" neck profile.I see the same description (Soft V) on the Baja tele and everyone online are saying the neck of the Baja is thick. It’s the best solution for your Fender body as it gives you the flexibility to use anyone’s neck.
Strat-Talk.com is an independent, member supported forum and is not affiliated with Fender Musical Instruments Corporation. I found Greg at Aperio via Google, and read all the entries on his informative site. Greg is an perfectionist and an artist.

Paraffin Oil For Constipation, Prerogative Meaning In Urdu, Graham Cracker Brands, Amaranthus Caudatus Medicinal Uses, Best Canvas Prints Reviews Australia, Theros Beyond Death Rare Lands, T-fal E76507 Ultimate Hard Anodized, Sigma Foveon Full-frame, Traveling To Arizona In May, Shua Meaning In English, Baroda Election Exit Poll 2020, Cra-z-art Glitter Sensory Bottle Instructions, Princess Ice Cream Maker Price, Dynamics 365 Marketing Vs Hubspot, Samyang Pink Spicy Level, Past Tense Verbs, Flotsam And Jetsam Official Website, Writing Sentences Worksheets Pdf, How To Sell A Log Home, Bottle Gourd Meaning In Punjabi, Nest Tag Does Not Work, Lesser Known Fairy Tale Princesses, Yurt Columbus Ohio, Stative And Dynamic Verbs Exercises Pdf, Carex Foam Ring Cushion, Uber Eats Promo, Non Continuous Verbs List Pdf, Carob In Urdu,